Fabric-Backed Industrial Liners

Diamondback™️ brand by Bailey-Parks

Cotton Fabric–Backed Diamondback® urethane sheets are Lightweight and flexible, can be glued to other substrates with commercial adhesives.

Diamondback® Cotton Fabric-Backed Industrial Liners

Lightweight and flexible, Cotton Fabric–Backed Diamondback® can be glued to other substrates with commercial adhesives.

Urethane sheets are available in standard sizes:

4 x 8 feet
4 x 10 feet
4 x 25 feet
4 x 50 feet
5 x 10 feet
5 x 25 feet
5 x 50 feet

Fabric backed sheet thickness can range from 3/16′ to 1’+ and be produced in sizes up to 10 x 50 feet.

Related Products

Ceramic Chip Urethane Liner

Embedding ceramic chips in urethane creates outstanding resistance to abrasion; Diamondback beats other manufacturers’ ceramic to urethane ratio per sheet.

Expanded Metal Back Sheet

The 16-gauge steel produces a sheet that’s more rigid and flat & creates a structurally sound stopping point for bolt heads. Thickness from 3/16” to 1”-plus.

Non-Reinforced (no backing) Liners

Non-reinforced urethane sheets have no backing. They are the most lightweight and flexible of all Diamondback® polyurethane sheet types and can be hand-formed.

Precision Cast Polyurethane Sheeting

Built to close tolerance specs like custom gasket fabrication; guaranteed uniform thickness, even at 1/32”. Abrasion resistant, abates noise & vibration, provides cushioning and insulation